xairflyer
03-24-2005, 07:15 PM
Anyone know how I slow down my automatic feed, it is always too fast when cutting metal.
|
View Full Version : Slowing down feed xairflyer 03-24-2005, 07:15 PM Anyone know how I slow down my automatic feed, it is always too fast when cutting metal. JFettig 03-24-2005, 07:59 PM If its the C2 mini lathe, I found it to be pretty good speed with the right tools and right size passes. what size passes and kind of tooling are you using? Jon xairflyer 03-24-2005, 09:51 PM even only taking off .5mm the speed is too fast, if I want a nice finish and turn up the chuck speed the feed is really un-usable Solar71 04-27-2005, 02:42 AM you may need to change a gear or two... sucks |