Is there anyone know about Salem control I have bought this control a while a go now I cannot get the schematic or how to hook it up. It is a three axis board. Please, let me know if anyone know. I like to start building my cnc. I am trying to convert a Taig to CNC.

Please, is there anyone know anything about Salem control. I bought one of their board, but they never send instruction or have instruction for it. I have try a lot of time to get something from them but no reply. This board is scr1125 it is a three axis stepper motor driver. Please, is there someone could help me on this.

Thanks you in advance.

Here is a link to the drive you are talking about. It was pretty easy to find doing a google search. They have the info you need at this link
http://www.salemcontrols.com/steppermotordrivers/sc325ms.html
Regards,
bpmw

Thanks bpmw,
That was the new model I have the old model probably the one just before they change it. My is the SC1125 not sc325. Thanks for your help. :(

Sorry about that, I hope you find the info somewhere. Try and leave them an e-mail requesting the operating manual.
Good luck,
bpmw

Vinmachine, here's the link to the file you need for the SC125MS:

http://www.salemcontrols.com/steppermotordrivers/downloads/SC125MS.pdf

Thank you for all of you for your helps. I have found what I was looking for on the net. I will start to put my mill together now.

Thank you all again.
Vin