I realy need help.
Now I can't use cycle program G71/72, the alarm arised. Maybe I was wrong, I guess there was incorrect paramater has set, but I didn't know excatly.
Here is part of parameter was set:

>(Fixed cycle)
>6200 0 0 0 0 0 1 1 1
>6201 0 0 0 0 0 0 0 1
>6202 0 0 0 0 0 0 0 0
>6210 G83.1 RETRACT 100
>6211 G83 RETRACT 1000
>6212 THRD CHMF VAL 5
>6213 THRD CHMF ANG 45
>6214 G71/G72 DEPTH % 0
>6215 G71/G72 PICK 500
>6216 G71/G72 APPROACH 500
>6217 G74/G75 RETRAC 100
>6218 G76 MIN DEPTH 50
>6219 G76 ALLOWANCE 25
>6220 G76 REPETITION 0

Is there any wrong parameters or else?

My machine is:
>WASINO MACHINE, LC 12A, NO 132, JUL 87
>CONTROLLER: FANUC SYSTEM 10T
Is anyone have list of the parameter?, would you send to my e-mail: saptoropawiro@yahoo.com

Thank,

Saptoro