I have a 1995 Fadal vmc 15xt, I have had some people trying to help me get this running, so I am not sure if this is a problem that was created due to inexperience. The message that I get on start up is

Must enter the backlash table

Have a version upgrade or memory has been corrupted memory needs to be zeroed.


Also when I go to the BL command nothing happens.


Help

Here's what to do:
DI
G0 3000
GO TO OTION #5
FALLOW INSTRUCTIONS;

HERE'S WHAT TO DO:
DI (ENTER)
G0 3000
GO TO OPTION #5
FALLOW INSTRUCTIONS

Daniel --
The BL command is not show a backlash table because the table does not exist. Also the error message is saying that your memory is corrupted. Follow the attached procedure to correct both issues.

Neal

Thanks a bunch, this fixed the problem. If there is someone in the Phoenix,Az location that would be willing to give a day of training on this machine please contact me. Thanks