I am building the Model A Imperial unit 18"x18"x7"

Below are the discrepancies I have found.

Okay, I want to make the following:
Gantry Plate 2 pcs.
For the 18"x18"x7"


In the A5.pdf file length = 19" (for the 12"x12"x5")(CORRECT?)

In the Size-Selection.pdf file length =18" (left side of pdf drawing for 12"x12"x5")(WRONG?)

Also, in the Size-Selection.pdf file length =20" (right side of pdf drawing for 18"x18"x7")(WRONG?) This drawing also states to add 2" to the original 12"x12"x5" plan height.

So, is the height for the 18"x18"x7" unit = 20" or 21"????

Looking at other dimensions I have deduced that it should be 21" in total.

Am I right or am I wrong? :confused:

B0SC0

Yes, I took a look at the size-selection drawing, the dimensions 18 and 20 should be removed, you are correct, if you want to increase your Z from 5 to 7 Add 2" to the basic gantry height for a total of 21"


I am building the Model A Imperial unit 18"x18"x7"

Below are the discrepancies I have found.

Okay, I want to make the following:
Gantry Plate 2 pcs.
For the 18"x18"x7"


In the A5.pdf file length = 19" (for the 12"x12"x5")(CORRECT?)

In the Size-Selection.pdf file length =18" (left side of pdf drawing for 12"x12"x5")(WRONG?)

Also, in the Size-Selection.pdf file length =20" (right side of pdf drawing for 18"x18"x7")(WRONG?) This drawing also states to add 2" to the original 12"x12"x5" plan height.

So, is the height for the 18"x18"x7" unit = 20" or 21"????

Looking at other dimensions I have deduced that it should be 21" in total.

Am I right or am I wrong? :confused:

B0SC0

Good, I thought maybe being new to this forum, I might have missed something.
I brought the dxf files into Autocad and converted them to be correct for the 18"x18"x7". If you want a copy of them for your plans, just let me know.

Thanks for the fast response.

B0SC0