Just completed my first paid job for my machine. In the photo it shows one of the bulkhead panels cut in 6mm marine plywood. I used a 3/8 downcut spiral bit and used bridges to hold the pieces during cutting. It took around 8 minutes to cut the sheet.

I am looking at fitting a vacuum system to make it easier to hold the material and eliminate the need for bridges.

cheers

Frans
Capeboatworks (http://www.capeboatworks.com.au)

Congratulations! Nice job. Hopefully it becomes the first of many, right?

Lance

Cool !! congratulations.
I have always wondered what hobby people do with their machines and wether or not they make monies at it.