|
View Full Version : 5-Axis Machining 5AxisMachining 03-17-2005, 07:41 AM I'm looking for help machining in 5-axis. The part I have is small, about .50" and I'm trying to machine .010" to .015" slots longitudally and such. Can anybody recommend a shop who has this ability? ~Thanks Chipmaker@verizon.net chop5280 03-17-2005, 01:43 PM Sounds like you need a wire EDM, Machining Concepts Inc. 574-267-6385 studysession 03-19-2005, 06:28 AM What is the advantage of having the 5 axis? 5AxisMachining 03-21-2005, 09:03 AM The end mill needs to be normal to the surface at all times. This can only be done by a 5-axis machine. |