|
View Full Version : EMCO-Fanuc Controller PC-keyboards wanted! kaktus-martin 09-26-2009, 02:11 PM Hi! I´m searching for two EMCO-Fanuc controller keyboards! Anybody here who has one or two for sale,ma from a retrofitted machine? All offers are very welcome! Thanks and best regards,Martin mactec54 09-27-2009, 10:29 AM Hi Martin Here is a photo of one I have that would work the whole front panel is available with cables idtkid 09-27-2009, 11:13 AM /\ Out of curiousity what is that machine? PC Mill 1XX? mactec54 09-27-2009, 11:27 AM Hi idtkid PC120 Lathe just 2 cables for hook up one to the dongle board & one to the small power transformer which is 230V the monitor/crt is seperate which goes to your computer kaktus-martin 09-27-2009, 12:03 PM I need the boards for a EMCO PC mill 50 and a EMCO PC turn 50,so I´m not sure,if the board at the picture will work. But,may,my problem is solved,I´ve found a guy,wo is willing to sell his boards. Thanks and best regards,Martin mactec54 09-27-2009, 12:10 PM Hi Martin Yes it will work it uses the same dongle board, I'm glad you found some PC50 parts |