unfinished 4th axis for my x2 cnc mini mill the spindle is a new mini lathe casting from little machine shop that i added a 5c spindle from a spin DID NOT SELL NOW SELLING JUST DRIVER AND STEPPER BUT NOT ON EBAY $50

fixture the ball bearings are japanese there is a draw tube you can see in the end that you will need to put hand wheel on it comes with 1 5c emergency collet

the KL- 4030 Microstepping Driver is new never used the KL23H276-30-6A NEMA 23 BIPOLAR STEPPER MOTOR 282 oz-in is used

i did not finish this because when i got to the worm gear i could not find a surplus one big enough and new cost to much for my budget
bid start at $90. flat rate shipping to usa only $9.75
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220482898663&ssPageName=STRK:

did not sell

this did not sell on ebay but if someone wants just the 4030 driver with stepper
motor $50 takes both $9.50sh the KL- 4030 Microstepping Driver is NEW! never used the KL23H276-30-6A NEMA 23 BIPOLAR STEPPER MOTOR 282 oz-in is used just contact me not ebay