I have seen a build at one time that some one used a gas torch vs a plasma. Now I can not find the build.

Would this be a good option to start with and work up to a good plasma cutter? I am wanting to do some limited cutting on 3/4" to 1" plate steel. Any help would be great.

There is one HERE (http://www.cnczone.com/forums/showthread.php?t=31133) & also HERE. (http://www.cnczone.com/forums/showthread.php?t=6923)

Thank you for the very fast reply

There is one HERE (http://www.cnczone.com/forums/showthread.php?t=31133) & also HERE. (http://www.cnczone.com/forums/showthread.php?t=6923)


The first link listed is my build. I'd be happy to answer any questions you may have. If you read my build log from start to finish & pay attention to the pictures. You may notice I had to back up & punt from doing some things wrong & having to re-do.

I jumped into the project without doing enough research. Although I am decent with muddling my way around with a PC. I had absoutely no understanding of what makes a cutting table tick.

My table is still somewhat of a science project. LOL It really does cut really well & more accurate than parts I was used to purchasing from steel suppliers.