hello im new here and im From Germany

there is a formula or something like it at the cutting speed plasma cutting can calculate? have cut 50 Amper

the speed is on the manual of plasma cutter.. go to www.hypertherm.com and look at the manual and it will show the suggested speed for cutting specific thickness material

if you havent purchased plasma cutter i suggest you to get hypertherm..

hello do not have a manual, and there is no cutting table, but a calculation formula, there is not it?

there is no formula as it depends on plasma machines.. if you were going to get hypertherm 45 here is cutting chart


http://www.hypertherm.com/en/Products_and_Services/Manual_Plasma/powermax45.jsp press on specs and the chart is there