tbenefi33
02-25-2005, 02:34 AM
Hello i'm newbee here and yall got a very intereting website lot of info here.
I desided to build the jgro free plans machine so far i got the adjustment block large and small,the gantry corner blocks,x axis lead screw,y bearing blocks,x axis top plate,x axis bottom plate,z axos lead screw,1/4-20 hex nuts.When i start putting together will post some pics.Was just wondering what would yall recammend for a motor that can cut metal,and what type of stepper motor did jgro use on his machine?
I desided to build the jgro free plans machine so far i got the adjustment block large and small,the gantry corner blocks,x axis lead screw,y bearing blocks,x axis top plate,x axis bottom plate,z axos lead screw,1/4-20 hex nuts.When i start putting together will post some pics.Was just wondering what would yall recammend for a motor that can cut metal,and what type of stepper motor did jgro use on his machine?