Hi,
I have just started usin Esprit.I am looking for 3d model of NakamureTome NTX Multi tasking machine for simulation and collision detection.

Thanks,
Javed

your machine dealer that it was purchased thru should be able to gt a model. Most likey they will only have access to a dxx, but you can make it a 3d stl model for Esprit.

Esprit does not do collision detection. You have to read actual code in a true 3d enviroment, like okuma cas or 3d okuma virtual monitor.

ESPRIT does collision detection. You can ask your dealer for the solids, as a customer they should provide you with solids! (I struggle with this too).

I know DP sells this stuff as well. They usually sell it with the post for free, so if you get the post, as for the machine set up with it.