heilcnc
07-25-2009, 11:17 AM
NEW MINI LATHE HEAD STOCK WITH CHUCK fits 7x10 7x12 mini lathe
It includes the spindle and all the pieces in the headstock casting, the High/Low shifter, all parts on the spindle, and all parts on the intermediate shaft, except the pulley new never used cost $119.00 from little machine shop 3 inch 3-Jaw self-centering lathe chuck includes a chuck key, inside and outside jaws,is on the headstock as shown that was $74.95 from little machine shop i got this to build a gang tool lathe but got layed off from work so it has to go the x y table for this project is in my other sales so look at my other ebay stuff
starting bid $140.00 no reserve $12.50 sh
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220457290011&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F%3F_from%3DR40%26_trksid%3Dp3907.m38.l1313%26_nkw%3D220457290011%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1
It includes the spindle and all the pieces in the headstock casting, the High/Low shifter, all parts on the spindle, and all parts on the intermediate shaft, except the pulley new never used cost $119.00 from little machine shop 3 inch 3-Jaw self-centering lathe chuck includes a chuck key, inside and outside jaws,is on the headstock as shown that was $74.95 from little machine shop i got this to build a gang tool lathe but got layed off from work so it has to go the x y table for this project is in my other sales so look at my other ebay stuff
starting bid $140.00 no reserve $12.50 sh
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220457290011&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F%3F_from%3DR40%26_trksid%3Dp3907.m38.l1313%26_nkw%3D220457290011%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1