hi,

i'm a newbie and i've playing around with different programs these past few days. i've found KCAM to be one of the best for me for now.
However, I do have one problem. I used the programme IMG TO G-CODE to get a g-code which i then imported into KCAM. when the dimensions in KCAM are set to inches, the image is its normal size (the size it was in IMG TO G-CODE). but when i changed to metric (mm), the picture is 5mm. what is the problem?
i hope you can help me.
thanks

YOU CAN SCALL AND OFFSET THE PICTURE IN KCAM TO NORMAL SIZE UES FUNCATION SCALL GCODE AND OFFSET