arghh!

i was reading a great site on www.cnccookbook.com and bought these plans
http://home.insightbb.com/~joevicar3/cheap_drawbar.htm

however they sent them to my mum (paypal addy) and she deleted them. There is no contact info on their site... so im a bit SOL unless one of you guys can help me.

If you purchased these plans and still have them, would you PLEASE send them to me after i show you a screenshot saying that i DID pay for these?

thank you very much!

They have an email listed on the homepage (http://home.insightbb.com/~joevicar3/default.htm), they should certainly resend you another copy.
Hoss

thanks man just sent them a email

Here's the McMaster part numbers for the push-to-connect NPT fittings I used. If you use these, you don't have to mess with the copper tubing.

51025K154
51025K114
51025K374

awsome thanks guys, i got it sorted :)

escott-- i have 100' rolls of .031"id, .04" id, 50' rolls of 1/8",3/16", 1/4", 5/16" and 3/8" though already