I need a working post file for a FADAL 6030 with a HS88 control.
3 axis only.
We just got esprit cam and don't know why it is a big deal to get a working post for a standard mach. with HS88 control.

Thanks in advance.

i could probably be able to help you out with that. Feel free to give me a shout and i could probably get it working if it already hasn't been fixed.

i could probably be able to help you out with that. Feel free to give me a shout and i could probably get it working if it already hasn't been fixed.

Got it going. Thanks

I am looking for a tube drilling fuction so I can drill the first surface then rapid down (without retracting out) then drill down thru the next surface then retract out.