i have rhinocam2.0 and a cncrouter
can anyone guide about the feed and speed values in rhino cam?
what can i take in consideration in my machine and motors to to fill those values in rhinocam? also tool values?

the values i enter makes my machine run very slow.

thanks.

i have rhinocam2.0 and a cncrouter
can anyone guide about the feed and speed values in rhino cam?
what can i take in consideration in my machine and motors to to fill those values in rhinocam? also tool values?

the values i enter makes my machine run very slow.

thanks.

To increase feedrate goto: 'Set Post-Processor Option'----->'Edit'---->'feed rate'------->input your desire feed rate value at xxx, High value = xxx, Scale factor = xxx