We have a Hawk TC150 and the spindle is out a little. Has anyone every adjusted theirs? Any tips?

Thanks

I have had a couple of decent hits with mine and thank goodness only the turret has moved,which is very simple but time consuming to realign.I have had a pretty good look inside where the head stock sits and I come away with the thoughts that if the turret is in alignment,then it would only be a matter of loosening the bolts that hold the headstock put a fixture in the chuck that holds a dial indicator and run it around the turret face and ajust as neccassary or if it has the same dowel pin method as the turret it makes it even easier.Hope this helps a little regards greg.

Hey while where talking cincinatti 150 hawkes would you by any chance be able to help me out with some imfo on the workings of the plotter as im missing the operators manual and i havn"t quite worked that part out yet,all the best Greg.