Good Day All.

This is my 1st post so I do hope this is the right place.

I have worked on CMS Brembana machine with OSAI and Easy Stone software from DDX Group from ITALY but I would like to starting work with PowerMILL.

So, I look for POSTPROCESSOR for OSAI to PowerMill (DELCAM) Software.

Maybe, PowerMill has compatible postprocessors with OSAI.

Hi collegue, I also use just start to use PowerMill for stoneworking, I use Emmedue Discovery and GMM Blizz (now on mounting).
If G-code of you machine isn't very cmplicated i could cend you my post.