I want to print my complete tool library for refering too and I can't figure out how. This is not a program tool list, I mean all of the tools listed in my own library.

A new user here so not sure if this is of much help.

I poked around a bit last night and found a \library directory which had a bunch of .csv formatted files. These files had names which appeared to be various tool library files (inch, metric, etc). I could open them but they did not look much in a format that printing would give you the results you are likely looking for. A search through the manual did not provide much additional info either.

Robert

Rory,
I replied to your SprutCAM Forum post, and I repeat it here.
The .csv extension is an Excel extension and you can open the file and print as much of it as you want.
However, its present format is not suitable for printing to normal page size, so you may need to reorganise the information you want to print. I suggest you make a scrap copy before starting, to avoid accidental trashing of the good file.
Bevin