Hey folks,

I have an Arrow 750 that we'd like to sell, since we haven't used it in a year. Before I can do that, we'd like the tools out of it, as they are basically brand new and worth quite a bit of money. I am not a CNC operator, nor do I pretend to be one, and need help getting the tools out. I literally have no idea what I'm doing looking at it. Please help me out. Thank you.

what kind of control is it

where are you located,

the controller says acromatic 2100. i'm not sure if i need to write a program or hopefully there's an option to just open the tool carriage and rotate it to take out each tool individually.

we're located 20 mins outside of milwaukee. i'm not sure what it's worth, but i'm going to upload pictures of it soon and put it up for sale.

Hello have you got power to the machine?
can you start machine?
regards
mallardfizz

To start machine
1.turn power switch on the back of machine
2.release red emergency switch on pendant
3.press green button on the controller and wait for initialization (takes a cpuple of minutes)
4.after initialization press geen button to start the hydraulics

To align the axis (axes) and the tool holder (mech)
1. On pendant press align button
2. The pendant screen gives option axes or mech
3. Press and hold the F1 button below the axes
4. Read controller screen to see when axis have aligned
5. Align the mech to tool number 1
6. Press the F2 button below the mech and read the controller screen
7. The contrroller needs to know the tool tool number wich is aligned with the spindle.
if the #1 was aligned put the #1 in the controller screen
Loading tools in the holder
1. Press the mech jog button
2. Press and hold the spindle button F1 to open the mech.
3. Press the inc or dec button F3 or F4 to rotate tool carousel.(tools can be pulled out)
4. Press the park button F2 to close the mech
Door must be closed to move the mech in and out

thank you all for your help. i have power and was able to turn it on before, just was unsure where to go from there. i will try that first thing in the morning tomorrow and let you know if it worked. i appreciate the quick responses.