PSSJEFF
02-09-2009, 10:35 AM
I am needing assistance on re-setting the Z axis home position and the Tool change height on an Okuma Cadet 4020 with a 700 control.
I am not familiar with the control.
I am not familiar with the control.
|
View Full Version : Need Help Re-Set Home Position on Okuma PSSJEFF 02-09-2009, 10:35 AM I am needing assistance on re-setting the Z axis home position and the Tool change height on an Okuma Cadet 4020 with a 700 control. I am not familiar with the control. |