I have written some 3 -axis mill postprocessors for unigraphics. So far I have experience with Maho, Simens, Fadal and Heidenhain controls. If you need any help give me a mail.

timoty@hot.ee

I NEED FOR UGNX 3 SEIMENS post processor FILE

I NEED FOR UGNX 3 SEIMENS post processor PUC FILE

You can download Post Processors from the GTAC website. UGS has a library of free posts.

http://ftp.ugs.com/unigraphics/pb_posts/

You will need a webkey login - this is free from UGS as long as you are on maintance.

Regards

John Joyce
i Knowledge Solutions
Westminster, CO
www.ikstata.com

Hi i need post for Milltronics Centurion 7 . I wonder i you could help me thnx.
bye

Ugur
Mech. Eng.
(Cad-Cae)

I NEED FOR UGNX 3 SEIMENS post processor PUC FILE

Some time ago i wrote post for sinumeric 840, 3 axis mill. Apdies write to my e-mail, let's talk about your problem

timoty@hot.ee

Timoty

Hi i need post for Milltronics Centurion 7 . I wonder i you could help me thnx.
bye

Ugur
Mech. Eng.
(Cad-Cae)

Tech26 write me about your problem. I need more information.

timoty@hot.ee

Timoty