|
View Full Version : conversion factor.... Matt McColley 02-07-2009, 02:35 PM can some one please share the conversion factor to get from N-cm to oz-in and yes... I'm being lazy, as all my good references are in a box in the attic. Matt Kalvin 02-07-2009, 02:53 PM Matt, Try google. In the search box type " 5 inches in cm" and it will give you the length in cm. I'm sure it'll do torque also. Actually it's amazing what it'll do. :) Cheers, Crevice Reamer 02-07-2009, 03:15 PM Multiply Nm by 141. That gets you pretty close. 141.6 is even closer. CR. Crevice Reamer 02-07-2009, 03:23 PM Oh! You wanted N cm? Multiply N cm by 1.416. CR. Hirudin 02-07-2009, 03:40 PM As Kalvin mentioned, Google will do most conversions but for some reason "## newton centimeters to ounce force inch" doesn't work. Can anyone figure out the correct terminology? Until then here's a good calculator... http://www.magtrol.com/support/torque_calc.htm Note: I'm not sure about other browsers, but if you're using Google Chrome you must hit the "Convert" button as hitting the <enter> key will just clear the form. This site actually has a few calculators, click below for more... http://www.magtrol.com/support/calculators.htm Dorsal 02-07-2009, 04:43 PM http://www.onlineconversion.com/ Save this as a bookmark or shortcut. http://www.onlineconversion.com/torque.htm 1 newton centimeter = 1.416 119 322 8 ounce inch |