We are pleased to announce the release of the 2nd generation DeskCNC SV-500 servo driver.

http://www.cnczone.com/gallery/data/500/252ndgendrvcnczone.jpg


This is a re-engineering of the original boards, with a 20% reduction in footprint ( 2 x 1.6 inches). All control connections are now by plug in headers and removable Phoenix terminals for power and motor connections. The drivers retain simplified servo tuning capabilities, visual status indication and add a 4X step multiplier function. This permits full utilization of the capabilities of the new 2nd generation DeskCNC controller boards, which can run at 125,000 steps per second.

Pricing is as follows: 1-2 boards $79, 3-99 boards $65, 100 plus $58.50. Purchase includes mating terminals, connector blocks, and crimp connector pins.

Photo, info and updated spec sheet. (http://tinyurl.com/4ybll)

These boards are immediately available for sale and are now included in all our servo kits and assembled servo systems.

Fred Smith - IMService
THE source for low cost cad-cam and desktop CNC
http://www.cadcamcadcam.com/hobby