does anyone know of any 3d scanning services in the uk especially the
midlands????????

any help would be greatly appreciated

What sort of size and accuracy? I ask because I am in the midlands and have some digitizing capability. At the moment only on small objects but I am building a router onto which I have a renshaw probe to mount.

Graham

Graham S

Thanks for the reply.

The accuracy I am looking for is at least a tenth of a mm and the size of the object is 550mm by 312 mm approx.

Thanks

:cheers:

Sorry for delayed reply, that is too big for may capability even when I finish the new machine.

Graham S

I've been reading your other posts and looked into the Sharp GP2D02...
http://www.junun.org/MarkIII/Info.jsp?item=30# ...It has it's own emitter built in but I think beter accuracy could be obtained by taking the unit apart and increasing the distance between the emitter and the sensor...

Anyways, are you using a laser rangefinder for the system you're building? Very curious.

regards,
Brennan

GRAHAM S


I have a guitar neck which I would like digitizing in cross sections (if possible). Would it be possible for you to do this on your machine??????????