Hi Everyone.
We just acquire a Cincinnati with A950 controller. We performed the Laser Calibration and found that the pitch error is above our tolerances. Therefore we need to use the controller to compensate the error. I understand that the A950 parameter is protected with password. Can anyone please let me know the password as we bought in this used machine (as it is) without the service manual.

Please help in the password to overwrite the compensation parameter. Cheers.

regards
William
PWT Manufacturing

Try 'service', 'setup', or 'maytag'. Your passwords may have been changed or these may be changes from original. Good luck

Hi I got a full set of manuals for an 850SX Acramatic controller, from a cincinatti sabre 750.

They're big and dirty (the manuals) I'll have a look thru if you think it might be the same ?

Also, anyone know where I can get a replacement 850SX Acramatic controller ? Apparently the machine is fine, just the controller is buggered....

Cheers.

default password is "service"

you may try "worldclass". Sometimes MAG tech peeps use this pw as a MAI or MTB level password.