enduroed
12-28-2008, 07:54 PM
Hey folks, first time here. Just started a business and bought a 1997 MS SL150-SMC from a company in Wisconsin. The pictures looked good but have never seen a worse kept machine. At least the oils were clean. Have so far spent 30 hours cleaning it, have at least another 10-15 left.
Anyway, I need a Operation Manual 1 for the machine. I have the OM 2 but not the 1. Maruka (who sells MS) wants $350. I think that is a little rediculous. I asked Maruka if they had it on .pdf but they did not.
Could also use a G & M code list if someone has something.
We have a start-up warranty and have had a few things replaced, hopefully the machine is healthy. Definetely learned a thing or two about used machine purchases. Will not buy from this company again.
The control is a MSC 518TC which is really the Fanuc 18TC.
Would also be interested in any Fanuc info.
Any help will be greatly appreciated.
Tks, Ed
Anyway, I need a Operation Manual 1 for the machine. I have the OM 2 but not the 1. Maruka (who sells MS) wants $350. I think that is a little rediculous. I asked Maruka if they had it on .pdf but they did not.
Could also use a G & M code list if someone has something.
We have a start-up warranty and have had a few things replaced, hopefully the machine is healthy. Definetely learned a thing or two about used machine purchases. Will not buy from this company again.
The control is a MSC 518TC which is really the Fanuc 18TC.
Would also be interested in any Fanuc info.
Any help will be greatly appreciated.
Tks, Ed