10bulls,

I tried the new Dll ( CamBam.CAD.0.9.4B-20081116.zip (http://www.cambam.co.uk/downloads/CamBam.CAD.0.9.4B-20081116.zip) ), It looks like CamBam+ is leaving an open vector during DXF Import.

The file attached below does not have any open vectors, try to open the dxf file into CamBam & you'll see what I'm talking about.

The screenshot shows the open vector, my guess is it's the last vector in that run?

Also any chance you could have CamBam recognize comments inside the DXF file (999 & the line below the 999).


Thanks, & GREAT program ya got!


.

Ah, it was actually the first entity that got lost...that was the one that created the new Layer, but it didn't then make it active.

I have uploaded a new patch to CamBam.CAD.dll here
CamBam.CAD.0.9.4B-20081117.zip (http://www.cambam.co.uk/downloads/CamBam.CAD.0.9.4B-20081117.zip)

I also made the 999 comments display as messages.

Thanks Switcher and keep that great artwork coming! :cheers:

Thanks, 10bulls

I'll try that new Dll. :)


.