Hi everybody,

this is my first message.

I have been asked to source a laser engraver/cutter that works with rolls and can do the kind of work shown in the attached image.

http://img404.imageshack.us/img404/6268/stencilax2.jpg

These self-adhesive polyetilene stencils (size 36 x 64 mm), are used to etch car windows thanks to an acid paste that goes through the stencil's laser burnt holes once the stencil has been stuck onto the glass. The laser also caters for the tear-apart lines.

Can you point me in the right direction?

Thanks.

MR T999