does anybody know of a scanner (probe or laser) that is compatible with mach?

Thanks for any help

My Equipment:
Gerber Edge II www.gspinc.com
Gerber envision
Vortech Router www.vortechcnc.com
Roland Versacamm www.rolanddg.com

My Software:
Corel X3
Vectric Vcarve Pro www.vectric.com
Adobe Illustrator & Photoshop
Mach 3 www.machsupport.com
Gerber Omega

I am looking for the same thing ,have you gotten anywhere with this

I have a Vortech table as well, did you ever have any luck setting up your probe to work with your table.
Curious if you were able to make it work and what input pin configuration you used.
Thanks
Randy

There is a plugin called Scan3d for Mach3. There is a lot more info on the Mach3 forums. Sorry don't have a direct link, and it looks like the Mach3 laser scanning technology is still in development, but it looks like some are having good results. Look at the Mach3 forums under "Video Probing".

Here is the link to the forum. It appears at the time of this posting their forum is down, but it's the right link :-)

http://www.machsupport.com/forum/index.php

Pike did you find a scanner that is working with Mach?

I also got notice of your message and i have not gotten far at all on the scanner with mach3,i just not real sure if its all going to work and its an investiment of over 300.00