I got my X2 set up and made some chips! For my first project I chose to make a bunch of clamps to hold down my little vise. I documented the build process here (http://www.instructables.com/id/making_vise_clamps_on_the_milling_machine).

I know next to nothing about machining! This was my first project! Any feedback or advise from the gurus would be appreciated.

Looks good, you'll soon discover that you'll only need one on each side of the vice and you'll have spares.

Nice Work Seb!
Nice instructable too.
You got me, those are something I never made.
Have to put a couple on the list.
GUTGW, Hoss

Thanks Hoss! :)

Next I'm going to try to make your belt drive conversion.