|
View Full Version : Help with choosing steppers motors Biggermens 10-22-2004, 09:23 AM Hello i need help choosing my steppers motors for my cnc wood router i want to build it will be about 8 to 9 feet long by 4 to 5 feet wide with the Z axs about 12" i called Pacific Scientific and thay did not want to help me out can anyone help me out please Thanks Biggermens 10-22-2004, 10:39 AM Are this Good moters ??? Pacific Scientific N31HRLH-LNK-NS-00 Thanks buscht 10-22-2004, 11:58 AM Those motors look perfect for your application, 665 oz-in if I read the information correctly. Plenty of power and NEMA 34 mount. Pac Sci makes a good motor. Just make sure you have the right power supply and controllers. sixpence 03-24-2005, 10:36 PM This exactly the motor I would like to purchase! Where can I do so? I have emailed Danaher motion 4 times now with no reply or could you piont me in the direction of something similar. 1.4 amp bipolar series 170v 15000rpm Thanks ESjaavik 03-25-2005, 05:40 AM @Sixpence: 15K RPM!? Link to datasheet please? That sounds too good to be true. About 10 times faster than others. sixpence 03-28-2005, 01:03 PM OOPS! It is too good to be true! Slip of the fingers, apologies for the extra zero The closest I can find is here http://products.danahermotion.com/danaher/ModelDetail.asp?User=StepMotors2&PkgID=424070&from=search&Rnd=970 or product no: N31xxxH-L (S) But as of yet no idea as to how to go about purchasing or from where. Any ideas? |