has anyone ever written code for a trumpf tc l 3030 with a bosch control and if so any help with the code would be helpful we want to use smartcam for the code. and does anyone know of any nesting software that will work smartcam. thank you

I have written a post for a several Trumpf punching machines for SmartCAM 11.5. Currently I am using WE-CIM software for all programming that I do that includes several Trumpf lasers. If you want a nesting solution for SmartCAM I would take at http://www.wittlockeng.com/CAD%20Nester%20DATA%20SHEET.pdf.

Your welcome to ask me question or use my service to set-up a post.

Independent CNC Programmer
www.independentcnc.com

My mission is to share CNC programming innovations for a lifetime.

has anyone ever written code for a trumpf tc l 3030 with a bosch control and if so any help with the code would be helpful we want to use smartcam for the code. and does anyone know of any nesting software that will work smartcam. thank you
Hi TP77,

MTC Software has a Post Processor used by ProNest Nesting Software that works with the Trumpf series of lasers. www.mtc-software.com

ProNest can import a range of CAD file formats for use with nesting.

Hope this helps.

Kerfit