Hello there,

I am having some trouble with the STOCK in backplot. It doesn't use the stock setup from the MACHINE GROUP PROPERTIES. I've been looking in Configuration but can't find anything. And in backplot (Verify) when i click on the configure box the Cilinder option is not fuctioning while my stock is a cilinder. Sinds I use mastercam I keep having trouble with the backploting stock.
I'am sure it's something simple but cant figure it out.
Thanks for any help.

There are some good guys on here that probably can help. I'm not one of them. I can make a suggestion tho. Have you also posted this question on www.emastercam.com ?

Lots of great help there, and many who post here also spend time there.

Sounds like you are talking about Verify not backplot. as MC does nothing in backblot with the stock.
But you are going to Stock setup and defining the stock correct.
then check the details in my picture.