G'day,

I've just got my hands on a new X2 mill, but before the first use I really want to give this a good thorough clean up.

I've found some old threads on this same subject, but the pics no longer work, and the links out-dated, so wondering if anyone has any up -to -date information or advice. In particular, any little 'quirks' I should keep an eye out for in pulling it apart, or putting back together.

Thanks in advance.

http://www.axminster.co.uk/downloads//manual_600858.pdf

https://littlemachineshop.com/Instructions/KDN_2axis_cnc.pdf

http://www.cncfusion.com/minimill1.html

http://www.axminster.co.uk/downloads//manual_600858.pdf

https://littlemachineshop.com/Instructions/KDN_2axis_cnc.pdf

http://www.cncfusion.com/minimill1.html

Thanks..

You might also find it useful to have a look at Arc Euro Trade's guide to machine preparation (http://www.arceurotrade.co.uk/projects/prepguides/X3%20Mill%20Preparation%20Guide.pdf) although it does relate to X3 rather than X2

Dave