Can somebody help me in obtaining a Fanuc 21 t Post processor for MCam V8.1.1. I dont really want to go to the reseller and pay for it.......
Thanks (chair)

darn to bad your not using gibbs i have a nice non edit post processor for this control... i have 5 takisawa lathes with the fanuc 21i-t(3 ex-108, and 2 ex-106's). Im sure its the same one. What Machine are you using?

i am using Fanuc 21T on an EMCO PC TURN 55. If you could E mail me the post then i will try it on my machine.
Cheers
Jason

Jason you will not be able to use a gibbs post in mastercam as they are diffrent.

Also have you asked the dealer? some times for a simple Fanuc posts we will give our customers one.

This is a Lathe I take it? I have not seen this machine.

Have you tried the MPLfan post in the Post dir? this is a Fanuc post.

If this not a lathe then try the MPfan let me know sir.

This is a lathe, and i have tried the fanuc post with the MCam but it doesnt seem to work.

This is a lathe, and i have tried the fanuc post with the MCam but it doesnt seem to work.

Depending on what's not working, it can often be a very simple matter to fix it. If you give is info on it, we can probably walk you thru the changes.

+1
what Reked said.

:nono: I have a Miyano lathe with fanuc 21t i made the dwg 's in geo path you think
that processor can make the progran for that machine? thanks