cncmaintenance
09-18-2008, 03:22 PM
After relaoding parameters from pcmcia card the lathe stuck with
Operator message NO. 2004 Hyd. ALM
Has anyone ever had this alarm?
Operator message NO. 2004 Hyd. ALM
Has anyone ever had this alarm?
|
View Full Version : KIA KIT60 cncmaintenance 09-18-2008, 03:22 PM After relaoding parameters from pcmcia card the lathe stuck with Operator message NO. 2004 Hyd. ALM Has anyone ever had this alarm? cncmaintenance 09-18-2008, 04:09 PM AL-15 chuck clamp unfinished This machine does not have a automatic chuck clamp or any detectors to tell if it is clamped. Fanuc tech help tells me these are KIA operator messages. Is there an english speaking KIA help line? cncmaintenance 09-19-2008, 03:24 PM The operator messages are embedded in the ladder logic, cross reference alarm numbers with addresses to find common uses robotek 03-17-2009, 07:33 PM My wife driving KIA. That's all I know about it:) cnctexas 08-16-2009, 12:26 PM AL-15 chuck clamp unfinished This machine does not have a automatic chuck clamp or any detectors to tell if it is clamped. Fanuc tech help tells me these are KIA operator messages. Is there an english speaking KIA help line? ------------ You can call (201)489-2887, hit -0- and ask for Sam. If he can't help you, ask for the dealer in your area. We offer free phone support on Hyundai-Kia with Fanuc controls for customers in Texas. |