Just wondering if someone could tell me where I might be able to buy, get or have made a quanity of 3.5" - 4" Diameter disc.

Not really concerned if it comes from a round, tube or flat stock as long as it's 3.5" to 4" OD X 1/2" ID and 1/16" thick when I get it. Quantity needed 50-100

More or less just looking for a large washer. I know there has to be a co that sells something simular with out having to have it made. These can be made from graphite or 316L stainless.
Thanks

I have ordered something similiar from Misumi, just search their online catalogue for "shim" or "washer".

http://www.misumiusa.com/

Cheers,

Mike

I have ordered something similiar from Misumi, just search their online catalogue for "shim" or "washer".

http://www.misumiusa.com/

Cheers,

Mike

I checked misumi the largest thing I found was 2" OD. Thanks

I can stamp 3.5 dia with .500 center. I already have tooling.