DHO.nl
09-02-2008, 04:19 PM
Since a few weeks we have a Titan punch machine it has a Fagor 8020P controller and a Fagor PLC 64.
Initially it was working but after a few days it frozen and did not want to move at all. Not in Jog mode or any other mode also at start-up and trying to callibrate/refrence mode it does not move.
Later on I found that in automation mode at execution of a move command by pressing alternately start & interupt button it hops to its position.
A problem is I do not have documentation of the PLC 64 nor software to program or look in it.
Initially it was working but after a few days it frozen and did not want to move at all. Not in Jog mode or any other mode also at start-up and trying to callibrate/refrence mode it does not move.
Later on I found that in automation mode at execution of a move command by pressing alternately start & interupt button it hops to its position.
A problem is I do not have documentation of the PLC 64 nor software to program or look in it.