Hello everyone,

I have a SMV1000 with a acamatic 2100 control, when i turned the machine on this morning, the lights on the er/lt modules flash on but instantly the machine losses power and trips out the switch on our distribution box.
Any ideas would be appreciated.

THANKS

I have had a similar situation with a bad power supply.

I have had a similar situation with a bad power supply.

I have a spare PSU, so i wil try replacing it. Thankyou

I have had a similar situation with a bad power supply.

I tried replacing the PSU but it still trips out. We have just instaled this
machine and was wondering if it could be the rating of the trip switch.We are
using a 16Amp fuse.Does anyone have any advise on which rating fuse we should be using?

Found out i needed a 30Amp trip switch. Its working fine now.