woodman08
08-26-2008, 05:43 PM
used african mahogany plaque is about 9x12 took under 3hours with a very small stepover
YouTube - cnc machining of a horse and plow
YouTube - cnc machining of a horse and plow
|
View Full Version : machining a horse and plow woodman08 08-26-2008, 05:43 PM used african mahogany plaque is about 9x12 took under 3hours with a very small stepover YouTube - cnc machining of a horse and plow cabnet636 08-27-2008, 06:29 AM that is cool!! you can run it a little faster and it takes a little practice. i am putting new motors on mine (stronger) as after the driver up grade i am now over rated for the 200oz that were on it for cutting 1/ inch signs jim cabnet636 08-28-2008, 09:09 PM 300 ipm sail boat run on 8-28-2008 YouTube - columbia sailing club sail boat |