----- For Mach3 CNC application -----

***** MPG mode *****
-- Step Jogging MPG,
-- Velocity Jogging MPG,
-- Continuous Jogging MPG,
-- Continuous Jogging rate MPG,
-- Feed rate Overridden MPG,
-- Spindle Speed Overridden MPG.

***** Control mode *****
-- Start/Pause,
-- Stop/Rewind,
-- Spindle on/off,
-- Jog on/off.

***** Safety ******
-- Build-in Emergency Stop Switch with auto lock / twist release,
-- Dedicated wires to E-stop relay,
-- Dedicated wire to Mach3 application.

**** Website *****
-- www.vistacnc.com (http://www.vistacnc.com)

http://vistacnc.com/a01_index_home/pic_a01/pendant_3_2.jpg
http://vistacnc.com/a01_index_home/pic_a01/pendant_5_2.jpg

Is you're screen a requirement with this, or can it be used with any screen?

Yes, it works with any screens, as long as the screen is written with Mach3 existing Standard and OEM DROs, Buttons and LEDs.

Only function "Zero/touch" in iMach3 Pendant needs iMach3 Screen(my screen). It resets Relative Position DRO in main page and work coordinate in other pages.

Thanks,
Lee