rocket67
07-30-2008, 05:03 AM
Great to see the Excitech has been given a sub forum. Thanks Mods!
I guess the original thread was becoming rather large with over 2,000 posts.
This gives us a fantastic opportunity to help new and intending buyers of the sh-cnc Excitech.
I had dicussed with Shannon ( Big S ) the possibility of posting some tutorials to show how the machine operates. The dilemna was where to post the tutorials without them becoming lost within the thread.
It was not very long ago that yours truly was absolutely cacking himself prior to the arrival of our machine. There were many doubts in my mind such as - could i successfully operate the machine? - would i crash it and ruin it? - could an absolute newbie to computers - design something, send it to the machine and actually make something? Well the fact of the matter is that i still do not know how to do the design work.
Thankfully we knew Ramon. He is very good on computers and is a uni student. Ramon was happy to earn some dollars to help get through university and be able to pay for the many excesses of todays youth.
He took to the learning curve with a great vigour and quickly became familiar with our operating software - V Carve Pro.
Today Ramon is a very capable cnc man! He continues to learn more about it all the time and we are amazed at his progress. Friend and forum member Matty Zee has recently helped Ramon to make some alterations to the way he operates the software - to the extent that it is almost a parametric program where he only needs to type the sizes of the required board and the calculations are all made in the software.
The idea was for Ramon to learn it first and then teach us how to do it, but time constraints with running a very busy family business have prevented us from learning the program ( so far ). My intention is to purchase a second machine - 1200 x 2400 running on single phase power that i can put in my garage at home so that i can learn in my spare time.
Rocket.
I guess the original thread was becoming rather large with over 2,000 posts.
This gives us a fantastic opportunity to help new and intending buyers of the sh-cnc Excitech.
I had dicussed with Shannon ( Big S ) the possibility of posting some tutorials to show how the machine operates. The dilemna was where to post the tutorials without them becoming lost within the thread.
It was not very long ago that yours truly was absolutely cacking himself prior to the arrival of our machine. There were many doubts in my mind such as - could i successfully operate the machine? - would i crash it and ruin it? - could an absolute newbie to computers - design something, send it to the machine and actually make something? Well the fact of the matter is that i still do not know how to do the design work.
Thankfully we knew Ramon. He is very good on computers and is a uni student. Ramon was happy to earn some dollars to help get through university and be able to pay for the many excesses of todays youth.
He took to the learning curve with a great vigour and quickly became familiar with our operating software - V Carve Pro.
Today Ramon is a very capable cnc man! He continues to learn more about it all the time and we are amazed at his progress. Friend and forum member Matty Zee has recently helped Ramon to make some alterations to the way he operates the software - to the extent that it is almost a parametric program where he only needs to type the sizes of the required board and the calculations are all made in the software.
The idea was for Ramon to learn it first and then teach us how to do it, but time constraints with running a very busy family business have prevented us from learning the program ( so far ). My intention is to purchase a second machine - 1200 x 2400 running on single phase power that i can put in my garage at home so that i can learn in my spare time.
Rocket.