Hi

I want;
Ladder diagram , read some macro variable and send to pc with "DPRNT" or different ladder code is it possible

I dont wants to write macro prg.

is it possible

thanks

Is my questation wrong?

I understand what you want to do, but you are better using macros. It's a lot easier and less likely to cause problems.

I used some macro for Operator Average

:7777
#501=#3011 (Date)
#502=#3012 (Current Time)
#503=#3901 (Number of Machined Parts)
#504=#4115 (Program Number)
DPRNT [#501 [54]]
..
..


But Operator same time chancing code

I want this program is hidden and never seen, never Changed

I think only ladder not easy changed and not easy understand

Now I want;

#501=#3011 (Date)
#502=#3012 (Current Time)
#503=#3901 (Number of Machined Parts)
#504=#4115 (Program Number)

These codes added in the ladder diagram is it possible ?

it probably is possible to edit your ladder to include these changes but i think you will need special software that is rather pricey. i think its called
Macro Compiler / Macro Executor or something like that. you could write your macro and save it under the 8000/9000 range that can be protected from edit or viewing.

Jamesweeed is right. That is the best way to do what you are trying to accomplish. Changing the ladder can be costly software and headaches to try and achive such a simple thing as what your tryin to do.

What kind of control are you using?

You can set it up in a 8000 or 9000 program number as a macro and even establish a G or M code to call that macro. Then you can lock those programs with a parameter so they can not be changed. There is also a parameter that locks the view of the program when it is running. So it would be like you want, out of sight and out of mind.

Stevo

My kontrol is Fanuc 21 iTB

I konw The 9000 program is not editing 3202
NE9 Which is the parameter not seen 9000 prg.


Many thanks