For those running an indexer here is a email of Rich, rgoldner@iname.com, who has written 2 wizards so far for the indexer. I have been working with both and they are great. Rich is a retired programer who has been building CNC machine running Mach since Mach's early years. He also helped a friend upgrade his Legacy Ornimental mill to CNC. The perfect background for doing indexer wizards.
One wizard is to do spiral cuts. Designed mainly to do rope/barley twists. It allows to use A, B or C as rotational axis, do CW or CCW twists, select depth of cut, etc. Here is a 14" piece I did.
The other wizard will wrap a file around a cylinder using A, B or C as the rotational wizard. Both work great and he is going to write more.
The other option is http://legacywoodworking.com. They have released the beta version of a spread sheet that will do rounding, fluting and rope/barley twists. Price is $100. Right now it's only advantage over Rich's wizards is that it will do fluting. Hopefull Rich will fix that shortly.

Are these wizards available for free? And can we download them somewhere?

No Rich will charge but price hasen't been set. He is giong to add more and I have encourged him to do a suite like New Fangle Solutions except for the indexer. Legacy charges $100 for their spreadsheat and it is not near as good. I tested the fluting wizard and found a minor problem which he should fix tomorrow. It will allow you to ramp in and out. Here is a test piece I did. Flutes are 3/4" wide, 4" long with a 1" ramp.

Check this thread:

http://www.cnczone.com/forums/showthread.php?t=61263

Rich has setup a web site to handle purchase of his wizards.
http://www.wizardsbyrich.embarqspace.com:80/
Rich strikes again! He has written a rounding wizard. It will also do tapering. This a piece of 4x4 that has been in the wood pile for a few years so finish of cut is terible. Now the spiral and fluting wizards will have to be changed so they can be used on tapered work. I do a lot of spiral and fluting work on columns up to 18" by 10'. The rounding, fluting and spiral wizards are goining to save me a LOT lot of work! Profit just went up at least 15%. Talked with Rich about more enhancements and hopefully he will do more. Three weeks ago I bought the Legacy spreadsheet for $90 and was happy to get it. Now it is obsolete as the 286 computers