I have a need to make some parts, and I believe investment casting may be cheaper than the current method (CNC machining).

Is it possible to get a rough estimate of casting price, such as $/lb. ? I'm looking for about 25-50 pieces, and each piece is about 0.2 pounds, so in total I'm guessing I'll need about 5 pounds of copper, plus whatever is necessary for gates/runners. I will provide at least the initial wax master, and could possibly provide all of the wax if you are not interested in making a mold for this small of a run.

These parts are heat exchangers, so the copper must be a pure grade, 99.9% (or higher) purity. I'm currently using C11000 for the machined parts.

If interested, please email me.

I wouldn't rule out machining until you get a quote. You would be surprised at the difference in a mold compared to machining. www.hobbymachine.net

Since the current method is machining, it's definitely not ruled out. ;) I'm looking at finding a less expensive method, if there is one.

I could quote doing the machining since I am a smaller shop.

Sorry all, didn't mean to post my business flyer.
I,m a newbie
caitolly

Hi Richard,
Welcome to CNCZone. This is a very open community with many experienced machinists. Please keep in mind our policies, specifically those about advertising:

POSTING ADVERTISEMENTS:
This is a forum of ideas, so advertisements are not allowed in this venue. A member may answer another members question about their occupation or business; however, if you are a rep, manufacturer, distributor or retailer for any product you cannot solicit, offer, promote, or market this product in the discussion forums. Offering support or technical answers for the item being discussed is permitted based on the criteria listed above. Please seek out the advertising information CNCzone has available to promote your products.

Should there be a new product announcement please use the Product Announcement and Manufacturer News Forum provided, or seek out information for advertising with CNCzone. This forum is not to be used for advertisement purposes, strictly announcements and news.

For a full list of the forum rules, please click here. (http://www.cnczone.com/forums/showthread.php?t=1)

If you have a specific quote for a RFQ, you are welcome to post it or email the respective requesting member, but please refrain from simply posting advertisements. This ensures a hospitable environment for all members. Thank you for understanding.

I work directly with a casting house.
send the particulars and I will run it by them.
We work well together, they will certianly be fair, and if you supply the wax, could be the way to go, money wise.
It's not all science, it's art.
caitolly

Bryan, there have been several people who have tried casting Cu heat exchangers without a lot of luck, you almost always end up with having to machine them to some extent after the casting, plus copper is one of the worst metals to cast. Roscal(another forum, you should remember him) casted like 50-300 cant remember exactly how many and he said it was very difficult and wasnt really worth it.

Jon