PDA

View Full Version : Grizzly G3617



DrDudley
07-03-2008, 10:10 PM
Does anyone have this machine and if so have you retrofit it to CNC? I am looking at this machine with the possible intent of purchasing it and turning it into a CNC machine. I have looked at several machines lately with my mind changing all the time. I want something that I can grow with that will allow me to do some large objects.
I have a limited budget but have resolved to spend my majority on a milling machine and the equipment to turn it into a CNC wonder. I have an extensive background in computers so that part doesn't bother me.

jalessi
07-03-2008, 11:57 PM
This should peak your interest then.

http://www.cnczone.com/forums/showthread.php?t=25895

Welcome to the Zone!

Jeff Alessi

DrDudley
07-04-2008, 02:14 AM
I wasn't sure if that was the same machine.

cjdavis618
07-25-2008, 01:04 PM
It is the same.

DrDudley
07-25-2008, 01:09 PM
I guess it is the same machine just distributed by others. Though with major problems if you read further.

arvidj
10-31-2011, 12:48 PM
The G3617 is not longer available from Grizzly. Is anyone aware of another supplier in the US for this machine? Obviously it will not be a 'G3617' and may have different color paint on it. It appears to be a "zx7550cw" before it is changed to the final sellers "model number".

Thanks