Hi. I would like to engage a CNC operator to cut 2 ovals out of a full sheet of 1.8x122x244cm (3/4 inch 4x8 feet) plywood. I will have 100 sheets. Each sheet would have its corners cut off, resulting in an oval. Then, another oval would be cut out of that, resulting in one oval and one ring. Can you give me a sense of what this would cost for 1 sheet and 100 sheets? I'm in Singapore, but pricing in the States will at least give me a benchmark. Schematic below. Thanks.

Kengo.

I would estimate that it would cost around $20 - $25 per sheet for the 100 sheets. that would include CAD time and toolpathing.

Hope this helps

cheers

Frans
Toolmach.



Hi. I would like to engage a CNC operator to cut 2 ovals out of a full sheet of 1.8x122x244cm (3/4 inch 4x8 feet) plywood. I will have 100 sheets. Each sheet would have its corners cut off, resulting in an oval. Then, another oval would be cut out of that, resulting in one oval and one ring. Can you give me a sense of what this would cost for 1 sheet and 100 sheets? I'm in Singapore, but pricing in the States will at least give me a benchmark. Schematic below. Thanks.

plus cost of the plywood